Storm Door Handle Hits Door Knob [3 Easy Solutions]
Storm doors are a popular feature in many homes as they provide an extra layer of protection against the elements while also allowing for ventilation. However, one common issue that can arise with storm doors is when the handle hits the door knob of the entry door.
This can be inconvenient and even prevent the doors from being opened or closed properly. In this article, we will explore the possible causes of this issue and provide solutions for resolving it.
Storm Door Handle Hits Door Knob
You should concerned about the handles on the storm door and the entry door interfering with each other when the doors are opened. It is possible that the handles could come into contact with each other if they are located on the same side of the doors and are not properly spaced.
One solution to this issue would be to check if there are any door handles available for either the storm door or the entry door that might fit properly and not interfere with each other. It is also possible to modify the trim on sidelights, if present, to accommodate the storm door. Another option could be to fasten a 1″ x 2″ piece of wood to the outside of the door frame and attach the storm door to it, which would create some space between the handles.
Before installing the storm door, it is a good idea to stand it up in the opening to see if there will be any interference between the handles. If there is, you can try one of the above solutions or consider hinging the storm door on the other side if possible.
Causes of the Issue
There are a few possible causes for the storm door handle hitting the entry door knob.
Entry Door Are Hinged on the Same Side
One cause could be that the storm door and the entry door are hinged on the same side. In this case, when the doors are opened, the handles may come into contact with each other.
Handles Are Not Properly Spaced
Another possible cause is that the handles are not properly spaced, resulting in them interfering with each other when the doors are opened. Other factors that could contribute to this issue include the type of handles being used and the size and layout of the door opening.
Solutions
There are several solutions that can be tried to resolve the issue of the storm door handle hitting the entry door knob.
Use Different Handles
One solution is to use different handles on either the storm door or the entry door.
For example, you could use a lever handle on the storm door instead of a knob handle, which may provide more clearance when the doors are opened. Another option is to modify the trim on sidelights, if present, to create more space between the handles.
This can be done by adding a 1″ x 2″ piece of wood to the outside of the door frame and attaching the storm door to it.
Fasten a Piece of Wood
Another solution is to fasten a 1″ x 2″ piece of wood to the door frame and attach the storm door to it. This can create some space between the handles and prevent them from interfering with each other. It is important to make sure that the 1″ x 2″ is properly fastened to the door frame and that the storm door is securely attached to it to ensure that it does not come loose.
Hinge the Storm Door
In some cases, it may be necessary to hinge the storm door on the other side of the door opening if none of the above solutions work. This can be a more involved process, as it may require drilling new holes for the hinges and potentially making other modifications to the door frame. However, hinging the storm door on the other side may be the only solution if the handles cannot be spaced properly on the same side.
How to Install a Strome Door Properly?
Here are some additional tips that may help prevent the storm door handle from hitting the entry door knob:
- Measure the door opening and the handles carefully before purchasing a storm door. Make sure that the handles will be properly spaced and will not interfere with each other when the doors are opened.
- Choose a storm door with a handle that is less likely to interfere with the entry door knob. For example, you could opt for a handle that is mounted on the top or bottom of the storm door rather than the side.
- Consider installing a storm door with a closer mechanism. This will allow the storm door to close more slowly and gently, which may help prevent the handle from hitting the entry door knob.
- Make sure that the storm door is properly aligned and properly adjusted. If the storm door is not properly aligned, the handle may hit the entry door knob when the doors are opened.
- Regularly lubricate the hinges and handles on both the storm door and the entry door to ensure that they operate smoothly and do not stick. This can help prevent the handles from interfering with each other when the doors are opened.
Things You Need to Follow When Installing Strom Door
There are a few things that you should know or have when installing a storm door to prevent the handle from hitting the entry door knob:
- Make sure that you have the correct tools and materials for installing the storm door. This may include a drill, screws, hinges, and a handle set.
- Measure the door opening and the handles carefully before purchasing a storm door. This will help ensure that the storm door fits properly and that the handles will be spaced correctly to prevent them from interfering with each other.
- Follow the manufacturer’s instructions for installing the storm door. These instructions will usually include details on how to properly position the handles and how to install the hinges.
- If you are not comfortable installing the storm door yourself, consider hiring a professional to do it for you. This will ensure that the storm door is properly installed and that the handles are positioned correctly.
- If you encounter any issues during the installation process, do not hesitate to seek help from the manufacturer or a professional. They will be able to provide guidance and assistance to help you successfully install the storm door.
Conclusion
In conclusion, the issue of the storm door handle hitting the entry door knob can be inconvenient and may prevent the doors from being opened or closed properly. There are several solutions that can be tried to resolve this issue, such as using different handles, modifying the trim on sidelights, or fastening a 1″ x 2″ piece of wood to the door frame.
If none of these solutions work, it may be necessary to hinge the storm door on the other side of the door opening. If you encounter this issue with your storm doors, we encourage you to try out different solutions and see what works best for your situation.
In the future, it may be helpful to consider these factors when choosing and installing a storm door to prevent the handle from hitting the door knob.
